Installation manual

116 Using Microsoft Active Directory
Installing the Dell Extension to the Active Directory Users and Computers Snap-In
When you are installing your systems management software using the Dell
Systems Management Tools and Documentation DVD, you can install the
Snap-in by selecting the Active Directory Snap-in option.
For 64-bit Windows operating systems, the Snap-in installer is located under
<DVD drive>:\SYSMGMT\ManagementStation\support\
OMActiveDirectory_SnapIn64.
NOTE: You must install the Administrator Pack on each management station that is
managing the new Active Directory objects. For more information on installing the
Administrator Pack, see "Opening the Active Directory Users and Computers Snap-
In." If you do not install the Administrator Pack, you cannot view the new object in
the container.
NOTE: For more information about the Active Directory Users and Computers
snap-in, see your Microsoft documentation.
Opening the Active Directory Users and Computers Snap-In
To open the Active Directory Users and Computers snap-in, perform the
following steps:
1
If you are on the domain controller, click Start  Admin Tools  Active
Directory Users and Computers
. If you are not on the domain controller,
you must have the appropriate Microsoft administrator pack installed on
your local system. To install this administrator pack, click
Start  Run ,
type
MMC, and press < Enter> .
The Microsoft Management Console (MMC) window appears.
2 Click File in the Console 1 window.
3 Click Add/Remove Snap-in .
4 Click Add .
5 Select the Active Directory Users and Computers snap-in and click Add .
6 Click Close and click OK .