Installation manual

106 Using Microsoft Active Directory
To set up the objects for this multiple domain scenario, perform the
following tasks:
1
Ensure that the domain forest function is in Native mode.
2 Create two Association Objects, AO1 (of Universal scope) and AO2, in any
domain. Figure 8-3 shows the objects in Domain2.
3 Create two RAC Device Objects, RAC1 and RAC2, to represent the two
remote systems.
4 Create two Privilege Objects, Priv1 and Priv2, in which Priv1 has all
privileges (Administrator) and Priv2 has Login privileges.
5 Group User1 and User2 into Group1. The group scope of Group1 must
be Universal.
6 Add Group1 as Member in Association Object 1 (AO1), Priv1 as Privilege
Object in AO1, and both RAC1 and RAC2 as Products in AO1.
7 Add User3 as Member in Association Object 2 (AO2), Priv2 as Privilege
Object in AO2, and RAC2 as a Product in AO2.
For Server Administrator or IT Assistant, the users in a single Association can
be in separate domains and need not be in a Universal group. The following is
a very similar example to show how Server Administrator or IT Assistant
systems in separate domains affect the setup of directory objects. Instead of
RAC devices, you will have two systems running Server Administrator (Server
Administrator Products sys1 and sys2). sys1 and sys2 are in different domains.
You can use any existing Users or Groups that you have in Active Directory.
Figure 8-4 shows how to set up the Server Administrator Active Directory
objects for this example.