Command Line Interface Guide

omreport: Viewing System Status Using the Instrumentation Service 77
omreport system shutdown or omreport servermodule shutdown
Use the omreport system shutdown or omreport servermodule shutdown
command to view any pending shutdown actions for the system. If properties
for shutdown are configured, executing this command displays these
properties.
NOTE: Due to the limitations of certain operating systems (for example, VMware
ESXi), certain features are not available with this release of OpenManage Server
Administrator.
omreport system summary or omreport servermodule summary
Use the omreport system summary or omreport servermodule summary
command to view a comprehensive summary of software and hardware
components currently installed on the system.
Example Command Output
Ty p e :
omreport system summary
or
omreport servermodule summary
NOTE: If the vFlash or SD card size is less than 1 GB, size is displayed in MB.
NOTE: If iDRAC is installed, Server Administrator displays LCC version. If BMC is
installed, Server Administrator displays the USC version.
The output that is displayed in the CLI window depends on the systems
management software, operating system, and hardware components and
options installed on the system. The following partial command results are
unique and may not resemble the hardware and software configuration of the
system:
System Summary
-----------------
Software Profile
-----------------
Systems Management
Name : Dell OpenManage Server
Administrator