Command Line Interface Guide

72 omreport: Viewing System Status Using the Instrumentation Service

---------------------

Removable Flash Media

---------------------

Settings

Enable: Informational, Warning and Critical

Disable: None

The full report lists the settings for all components in the system for which

events are generated.

To view the status for components of a specific type, use the omreport system

events type=

or omreport servermodule event type=

command. This command displays a summary of each

component in the system for which events are generated. Table 3-7 shows the

events displayed for various component types.

NOTE: Due to the limitations of certain operating systems (for example, VMware

ESXi), certain features are not available with this release of OpenManage Server

Administrator.

Table 3-7. System Events by Component Type

name=value pair Description

type=accords Reports events for AC power cords

type=battery Reports events for batteries

type=fanenclosures Reports events for fan enclosures

type=fans Reports events for fans

type=intrusion Reports events for chassis intrusion

type=log Reports events for logs

type=memory Reports events for memory

type=powersupplies Reports events for power supplies

type=redundancy Reports events for redundancy

type=systempower Reports events for system power

type=temps Reports events for temperatures

type=removableflashmedia Reports events for removable flash media

type=volts Reports events for voltages