Command Line Interface Guide

70 omreport: Viewing System Status Using the Instrumentation Service
• Temperature Failure
•Voltage Warning
•Voltage Failure
• Processor Warning
•Processor Failure
•Hardware Log Warning
•Hardware Log Full
•Watchdog Asr
•Storage System Warning
•Storage System Failure
• Storage Controller Warning
• Storage Controller Failure
• Physical Disk Warning
• Physical Disk Failure
• Virtual Disk Warning
• Virtual Disk Failure
• Enclosure Warning
• Enclosure Failure
• Storage Controller Battery Warning
• Storage Controller Battery Failure
• Removable Flash Media Present
• Removable Flash Media Removed
• Removable Flash Media Failure
NOTE: Storage Controller Battery Warning and Storage Controller Battery Failure
events are not available on Blade systems.
NOTE: System Power Probe Warning is not applicable to Blade systems.
omreport system assetinfo or omreport servermodule assetinfo
Use the omreport system assetinfo or omreport servermodule assetinfo
command to see cost of ownership data for the system, such as acquisition,
depreciation, and warranty information. To set any of these fields, use the