Command Line Interface Guide

omreport: Viewing System Status Using the Instrumentation Service 67
omreport system or omreport servermodule
Use the omreport system or omreport servermodule command to see a
general status of the components of the system. When you specify a level 3
command, such as omreport system shutdown or omreport servermodule
shutdown, get detailed information for one system component rather than
the high-level status obtained with omreport system or omreport
servermodule.
Ty p e :
omreport system
or
omreport servermodule
If the system has both a main system chassis or main system and at least one
direct attached storage device, Server Administrator may display a summary
that resembles the following example:
Commands for Viewing Logs
Use the omreport system or omreport servermodule command to view logs:
the alert log, the command log, and the hardware or ESM log.
NOTE: If the Alert log or Command log displays invalid XML data (such as when
XML data generated for the selection is not well-formed), to clear the log and
resolve the issue type: omconfig system alertlog action=clear or
omconfig system cmdlog action=clear. If you need to retain the log
information for future reference, save a copy of the log before clearing. See
"Commands for Clearing Logs" on page 158 for more information about clearing logs.
To view the contents of the alert log, type:
omreport system alertlog
or
omreport servermodule alertlog
SEVERITY : COMPONENT
Ok : Main System Chassis
Critical : Storage