Command Line Interface Guide

omreport: Viewing System Status Using the Instrumentation Service 65
omreport chassis slots or omreport mainsystem slots
Use the omreport chassis slots or omreport mainsystem slots command to
view properties of the system’s slots.
Ty p e :
omreport chassis slots index=n
or
omreport mainsystem slots index=n
The index parameter is optional. If you do not specify the index, Server
Administrator displays properties for all of the slots in the system. If you
specify the index, Server Administrator displays properties for a specific slot.
NOTE: To maintain consistency across the commands, the output format of this
command has changed. Change the user scripts as applicable.
For each slot in the system, values display for the following fields: Index,
Slot ID, Adapter, and Data Bus Width.
Index is the number of the slot in the system.
Slot ID is the silk screen name printed on the system's motherboard next to
the slot. Alphanumeric text uniquely identifies each slot in the system.
Table 3-6. omreport chassis remoteaccess or omreport mainsystem remoteaccess
name=value pair Description
config=additional Reports the current state of IPv4 and IPv6 addresses on
iDRAC.
config=advsol Reports advanced BMC/iDRAC or remote access information
on a serial over local area network (LAN) connection.
config=nic Reports BMC/iDRAC or remote access information for the
LAN.
config=serial Reports serial port information for BMC or remote access.
config=serialoverlan Reports BMC/iDRAC or remote access information on a serial
over LAN connection.
config=
terminalmode
Reports terminal mode settings for the serial port.
config=user Reports information on BMC/iDRAC or remote access users.