Command Line Interface Guide

64 omreport: Viewing System Status Using the Instrumentation Service
For each power supply profile in the system, values display for the following
fields:
• Status
•Location
•Type
• Rated Input Wattage (in Watts)
• Maximum Output Wattage
• Online Status
• Power Monitoring Capable
omreport chassis remoteaccess or omreport mainsystem remoteaccess
Use the omreport chassis remoteaccess or omreport mainsystem
remoteaccess command to view general information on baseboard
management controller or integrated Dell remote access controller
(BMC/iDRAC) and
remote access controller if DRAC is installed.
Ty p e :
omreport chassis remoteaccess
or
omreport mainsystem remoteaccess
NOTE: To maintain consistency across the commands, the output format of this
command and the subsequent command levels has changed. So, you may have to
change the user scripts as applicable.
The output of the omreport chassis remoteaccess or omreport mainsystem
remoteaccess command lists each of the valid parameters. Table 3-6 shows
the available settings.