Command Line Interface Guide

omreport: Viewing System Status Using the Instrumentation Service 55
The index parameter is optional. If you do not specify the index, Server
Administrator displays properties of all NICs on the system and the values for
the following fields: Index (NIC card number), Interface Name, Vendor,
Description, Connection Status, and Slot.
If you specify the index, Server Administrator displays properties for a specific
NIC and the values for the following fields: Physical Interface, Interface
name, IPv4 Addresses, IPv6 Addresses, Physical Interface Receive Statistics,
Physical Interface Transmit Statistics, Interface Receive Statistics, and
Interface Transmit Statistics.
NOTE: The Fibre Channel over Ethernet (FCoE) and iSCSI over Ethernet (iSoE)
features of Converged Network Adapter (CNA) cards are not supported on VMware
ESX and VMware ESXi systems.
To view Team interface properties, type:
omreport chassis nics config=team index=n
or
omreport mainsystem nics config=team index=n
NOTE: This command is applicable only if Team interface is configured in the
system. Team interface is configured using NIC vendor tools, such as Broadcom.
The index parameter is optional. If you do not specify the index, Server
Administrator displays details of all the Team interfaces on the system and
the values for the following fields: Index (NIC card number), Interface
Name, Vendor, Description, and Redundancy Status.
If you specify the index, Server Administrator displays the Team interface
details for the specific NIC and the values for the following fields: Team
Interface, Interface, IPv4 Addresses, IPv6 Addresses, Team Interface
Receive Statistics, Team Interface Transmit Statistics, Interface Receive
Statistics, and Interface Transmit Statistics.
omreport chassis ports or omreport mainsystem ports
Use the omreport chassis ports or omreport mainsystem ports command to
view properties of the system’s parallel and serial ports.
Values display for the following fields: Port Type, External Name,
Base I/O Address, IRQ Level, Connector Type, and Maximum Speed.