Command Line Interface Guide

46 omreport: Viewing System Status Using the Instrumentation Service
To view all available boot devices, alias names, and boot order sequences,
type:
omreport chassis biossetup attribute=bootorder
NOTE: On Linux systems, user or user groups upgraded to administrator or
administrator groups cannot view the boot order sequence.
omreport chassis currents or omreport mainsystem currents
This command is no longer available through Server Administrator.
Table 3-4. BIOS Setup Groups on PowerEdge yx2x Systems
Group Description
BIOS Boot Settings Controls the system boot settings when bootmode is set to
bios.
Boot Settings Controls the system boot settings when bootmode is set to
bios.
Embedded Server
Management
Sets up the Embedded Server Management options.
Integrated Devices Controls the devices integrated on the system board.
Memory Settings Controls the system memory settings.
Miscellaneous Settings Controls some miscellaneous system settings.
One-Time Boot Supports one-time boot to a specified device.
Processor Settings Controls the processor(s) settings of the system.
SATA Settings Control the embedded SATA ports settings.
Serial Communication Controls the Serial Communication options.
Slot Disablement Controls the system slots that are present on the system.
System Information Displays the information that uniquely identifies the
system.
System Profile Settings Controls the power management settings.
System Security Controls the security features of the system.
UEFI Boot Settings Controls the system boot settings when boot mode is set to
uefi.