Command Line Interface Guide

omreport: Viewing System Status Using the Instrumentation Service 29
3
omreport: Viewing System Status
Using the Instrumentation Service
The omreport command allows you to see detailed information about
the system components. Retrieve summaries for many system components at
one time, or get details about a specific component. This chapter shows you
how to get reports with the level of detail that you want.
Commands documented in this chapter vary in whether they define the fields that
appear in the results of a particular omreport command. Fields are defined only
if they have a special or less familiar use.
As with all other components, use omreport to view component status, and
omconfig to manage a component. For information on configuring
components for management, see "omconfig: Managing Components Using
the Instrumentation Service" on page 87.
Use omreport commands to get information you need to execute an
omconfig command. For example, to edit the minimum temperature for a
warning event on a temperature probe, you must know the index of the probe
you want to configure. Use omreport chassis temps to display a list of probes
and their indexes.
Table 3-1. System Availability for the omreport Command
Command Level 1 Command Level 2 Applicable To
omreport modularenclosure Blade systems
servermodule Blade systems
mainsystem Blade systems
system Rack and Tower systems
chassis Rack and Tower systems
preferences Blade or Rack, and Tower
systems