Command Line Interface Guide

omconfig storage Commands 263
Example Syntax
To re-key the encryption key for the controller, type:
omconfig storage controller action=rekeylkm
controller=1
omconfig Convert Multiple RAID to Non-RAID
Use the following omconfig storage command syntax to convert multiple
RAID to non-RAID on the given controller.
Complete Syntax
omconfig storage controller action=
convertraidtononraid controller=id pdisk=<PDISKID>
where id is the controller ID as reported by the omreport storage controller
command and PDISKID is specified as:
pdisk=connector:enclosureID:targetID |
connector:targetID
Example Syntax
To convert multiple RAID to non-RAID on the controller 0, type:
omconfig storage controller action=
convertraidtononraid controller=0 pdisk=0:2:3
omconfig Convert Multiple Non-RAID to RAID
Use the following omconfig storage command syntax to convert multiple
non-RAID to RAID on the given controller.
Complete Syntax
omconfig storage controller action=
convertnonraidtoraid controller=id pdisk=<PDISKID>
where id is the controller ID as reported by the omreport storage controller
command and PDISKID is specified as:
pdisk=connector:enclosureID:targetID |
connector:targetID