Command Line Interface Guide

258 omconfig storage Commands
Complete Syntax
omconfig storage controller action=
importforeignconfig controller=id
where id is the controller ID as reported by the omreport storage controller
command.
NOTE: This command is supported only in firmware version 5.0.x.
Example Syntax
To import foreign configurations on controller 1, type:
omconfig storage controller action=
importforeignconfig controller=1
omconfig Import or Recover Foreign Configuration
Use the following omconfig command syntax to import and recover all virtual
disks that reside on physical disks newly attached to the controller.
Complete Syntax
omconfig storage controller action=
importrecoverforeignconfig controller=id
where id is the controller ID as reported by the omreport storage controller
command.
NOTE: This command is supported only on firmware version 5.1.1.
Example Syntax
To import and recover foreign configurations on controller 1, type:
omconfig storage controller action=
importrecoverforeignconfig controller=1
omconfig Clear Foreign Configuration
Use the following omconfig command syntax to clear or delete all virtual
disks that reside on physical disks newly attached to the controller.