Command Line Interface Guide

omconfig storage Commands 231
omconfig Cancel Initialize Virtual Disk
Use the following omconfig command syntax to cancel the initialization of a
virtual disk.
Complete Syntax
omconfig storage vdisk action=cancelinitialize
controller=id vdisk=id
where id is the controller ID and virtual disk ID as reported by the omreport
command. To obtain these values, type omreport storage controller to display
the controller IDs and then type omreport storage vdisk controller=ID to
display the IDs for the virtual disks attached to the controller.
Example Syntax
To cancel the initialization of virtual disk 4 on controller 1, type:
omconfig storage vdisk action=cancelinitialize
controller=1 vdisk=4
omconfig Cancel Background Initialize
Use the following omconfig command syntax to cancel the background
initialization process on a virtual disk.
Complete Syntax
omconfig storage vdisk action=cancelbginitialize
controller=id vdisk=id
where id is the controller ID and virtual disk ID as reported by the omreport
command. To obtain these values, type omreport storage controller to display
the controller IDs and then type omreport storage vdisk controller=ID to
display the IDs for the virtual disks attached to the controller.
Example Syntax
To cancel background initialization on virtual disk 4 on controller 1, type:
omconfig storage vdisk action=cancelbginitialize
controller=1 vdisk=4