Command Line Interface Guide

208 omreport storage Commands
omreport Cachecade Status
Table 7-14 describes the syntax for the omreport Cachecade Commands.
Table 7-14. omreport Virtual Disk Commands
Required Command
Levels (1, 2, 3)
Optional name=value pairs Use
omreport storage
cachecade
Displays property information
for all cachecades on all
controllers.
controller=id
where id is the controller
number. For example:
controller=0.
Displays all cachecades on the
specified controller.
controller=id cachecade=id
where id is the controller
number and the cachecade
number. For example:
controller=0 cachecade=1.
Displays the specified
cachecade on the controller.