Command Line Interface Guide

20 Introduction
NOTE: omupdate commands are no longer supported in Server Administrator and
are replaced by Dell Update Package or Server Update Utility commands. To update
the different components, download the Dell Update Package and run <package
name> /s [/f]. For more information on corresponding CLI syntax, see the Dell Update
Packages for Operating Systems User’s Guide or the Dell OpenManage Server Update
Utility User’s Guide at support.dell.com/manuals.
Additional useful topic about the CLI include:
• "Working With CLI Command Results" on page 281
CLI Error Checking and Error Messages
When you type CLI commands, the CLI checks these commands for correct
syntax. If you type a command and the command is executed successfully,
a message displays, stating that the command is successful.
Success Messages
When you type a successful omconfig command, data for that component is
displayed.
The following omconfig command examples displays valid CLI commands
and their success messages:
Command:
omconfig chassis temps index=0 warnthresh=default
Message:
Temperature probe warning threshold value(s) set
successfully.
Command:
omconfig chassis biossetup attribute=numlock
setting=on
omreport "omreport: Viewing System Status
Using the Instrumentation Service"
on page 29
Table 1-1. CLI Commands and Sections in This Guide
(continued)
Primary CLI
Command
Section Title Related Sections