Command Line Interface Guide

omreport storage Commands 199
omreport Controller Status
Table 7-4 describes the syntax for the omreport Controller Commands.
Table 7-4. omreport Controller Commands
Required
Command Levels
(1, 2, 3)
Optional name=value pairs Use
omreport
storage
controller
Displays property information for all
controllers attached to the system.
controller=id
where id is the
controller number. For
example: controller=0
Displays the specified controller and all
attached components such as enclosures,
virtual disks, physical disks, and so on.
controller=id
info=foreignkeyids
Displays the locked foreign configuration
information for import or clear operations.
controller=id
info=pdslotreport
Displays the empty and occupied slot details
of enclosures in the controller.
NOTE: This command is not supported on
Blackplane, SCSI, and SWRAID controllers.