Command Line Interface Guide

186 omconfig system or servermodule assetinfo: Editing Cost of Ownership Values
You can type more than one omconfig system assetinfo or omconfig
servermodule assetinfo command at the same time, as long as all the
parameters for name=value pair 2 belong to the same name=value pair 1. For
an example, see "Example Commands for Adding Acquisition Information" on
page 173.
Adding System Information
System information includes the primary user of the system, the phone
number for the primary user, and the location of the system. Table 5-11 shows
the valid parameters for adding system information.
Table 5-11. omconfig system assetinfo info=system or omconfig servermodule
assetinfo info=system
Command
Level 1
Command
Level 2
Command
Level 3
Name=
Value Pair 1
Name= Value Pair 2 Description
omconfig
system or
servermodule
assetinfo
info=
system
location=<text> Location of the
system.
primaryphone=
<n>
Phone number of
the primary user
of the system.
primaryuser=
<user>
Primary user of
the system.