Command Line Interface Guide

162 omconfig: Managing Components Using the Instrumentation Service
event=processorabsent Sets action or enables or disables alert generation
when a processor probe detects that the processor is
absent.
event=redundegrad Sets action or enables or disables alert generation
when the system fans and/or power supplies become
inoperative, resulting in less than full redundancy for
that component.
event=redunlost Sets action or enables or disables alert generation
when the system fans and/or power supplies become
inoperative, resulting in a lost or a no redundant
components working condition for that component.
event=systempowerwarn Sets actions when a power consumption probe detects
a warning value.
event=systempowerfail Sets actions when a power consumption probe detects
a failure value.
event=tempwarn Sets action or enables or disables alert generation
when a temperature probe detects that the
temperature is approaching the maximum high or low
limits.
event=
removableflashmediapresent
Sets actions that Server Administrator performs when
the system detects a removable flash media.
event=
removableflashmediawarn
Sets actions that Server Administrator performs when
a removable flash media warning is displayed.
event=
removableflashmediafail
Sets actions that Server Administrator performs when
a removable flash media fails.
event=tempfail Sets action or enables or disables alert generation
when a temperature probe detects that the
temperature is either too high or low for proper
operation.
event=voltfail Sets action or enables or disables alert generation
when a voltage probe detects that the voltage is too
low for proper operation.
event=intdualsdcardcritical Sets actions that Server Administrator performs when
an internal dual SD card critical event occurs.
Table 4-26. omconfig system platformevents
(continued)
Event Name Description