Command Line Interface Guide

156 omconfig: Managing Components Using the Instrumentation Service
event=tempfail Sets actions when a temperature probe detects a failure
value.
event=voltwarn Sets actions when a voltage probe detects a warning
value.
event=voltfail Sets actions when a voltage probe detects a failure
value.
event=watchdogasr Sets actions that Server Administrator performs on the
next system startup after a watchdog Automatic System
Recovery (ASR) is performed for a hung
operating system.
event=
removableflashmediapresent
Sets actions that Server Administrator performs when
the system detects a removable flash media.
event=
removableflashmediaremove
d
Sets actions that Server Administrator performs when a
removable flash media is removed.
event=
removableflashmediafail
Sets actions that Server Administrator performs when a
removable flash media fails.
event=storagesyswarn Sets actions when a storage system detects a warning
value.
event=storagesysfail Sets actions when a storage system detects a failure
value.
event=storagectrlwarn Sets actions when a storage controller detects a warning
value.
event=storagectrlfail Sets actions when a storage controller detects a failure
value.
event=pdiskwarn Sets actions when a physical disk detects a warning
value.
event=pdiskfail Sets actions when a physical disk detects a failure value.
event=vdiskwarn Sets actions when a virtual disk detects a warning value.
event=vdiskfail Sets actions when a virtual disk detects a failure value.
event=enclosurewarn Sets actions when an enclosure detects a warning value.
event=enclosurefail Sets actions when an enclosure detects a failure value.
event=
storagectrlbatterywarn
Sets actions when a storage controller battery detects a
warning value.
NOTE: Event not available on Blade systems.
Table 4-23. Events for Which You Can Set Alert Actions
(continued)
Event Name Description