Command Line Interface Guide

152 omconfig: Managing Components Using the Instrumentation Service
omconfig preferences webserver
Use the omconfig preferences webserver command to set the encryption
levels of the Server Administrator Web server and configure the URL launch
point in the Server Administrator Web server environment.
Table 4-21 shows the name=value pairs you can use with this command.
Table 4-21. Configuring Webserver Preferences
For example, to set the URL launch point use the following command:
omconfig preferences webserver attribute=seturl
host=<name, ip, fqdn> port=<number>
The host input must contain a valid IPv4 or IPv6 address, or a valid
hostname.
To set the signing algorithm value, use the following command:
omconfig preferences webserver attribute=
signalgorithm algorithm<MD5|SHA1|SHA256|SHA512>
For more information on configuring Web server preferences, see the Dell
OpenManage IT Assistant User’s Guide.
name=value pair 1 name=value pair 2 Description
attribute=
sslencryption
setting=autonegotiate
| 128bitorhigher
autonegotiate: Sets the encryption
levels automatically based on your web
browser settings.
128bitorhigher: Sets the encryption
levels to 128-bit or higher.
attribute=seturl host=<string> port=
<value>
Enables you to configure the URL
launch point in the Server
Administrator Web server
environment.
attribute=
signalgorithm
algorithm=MD5 |
SHA1 | SHA256 |
SHA512
MD5: Sets the key signing algorithm
to MD5.
SHA1: Sets the key signing algorithm
to SHA1.
SHA256: Sets the key signing
algorithm to SHA256.
SHA512: Sets the key signing
algorithm to SHA512.