Command Line Interface Guide

omconfig: Managing Components Using the Instrumentation Service 143
id=user id
dracusergroup=admin |
poweruser | guest |
custom | none
id=user id: User ID of the user
being configured.
dracusergroup=admin: Enables the
Administrator user privileges.
dracusergroup=poweruser: Enables the
Power User privileges.
dracusergroup=guest: Enables the
Guest user privileges.
dracusergroup=custom: Enables the
Custom User privileges.
NOTE: See Table 4-13 for more
information on dracusergroup=custom.
dracusergroup=none: Does not enable
user privileges.
config=user
(continued)
id=user id
extipmiusergroup=admin
| operator | readonly |
custom | none
NOTE: extipmiusergroup
user group is available only
on Dell yx0x Blade systems.
id=user id: User ID of the user
being configured.
extipmiusergroup=admin: Enables the
Administrator user privileges.
extipmiusergroup=operator: Enables
the Operator privileges.
extipmiusergroup=readonly: Enables
the Read Only privileges.
extipmiusergroup=custom: Enables the
Custom User privileges.
NOTE: It is recommended that you use
the operator and readonly options for
systems with iDRAC Enterprise.
NOTE: See Table 4-14 for more
information on extipmiusergroup=
custom.
extipmiusergroup=none: Does not
enable user privileges.
Table 4-12. omconfig chassis remoteaccess or omconfig mainsystem
remoteaccess
(continued)
name=value pair 1
config=
name=value pair 2 Description