Command Line Interface Guide

omconfig: Managing Components Using the Instrumentation Service 129
NOTE: Reboot the system for the power profiles setup options to take effect.
omconfig chassis pwrmonitoring or omconfig mainsystem
pwrmonitoring
Use the omconfig chassis pwrmonitoring or omconfig mainsystem
pwrmonitoring command to configure power consumption information.
memorypowermode=
min | 800 | 1067 |
1333 | max
min: Sets the mode to minimum
power utilization.
800 | 1067 | 1333: Set the mode to
800, 1067, or 1333 MHz.
max: Sets the mode to maximum
performance.
NOTE: These options are applicable
only when a custom profile is selected.
fanmode=min | max min: Sets the mode to minimum
power utilization.
max: Sets the mode to maximum
performance.
NOTE: These options are applicable
only when a custom profile is selected.
Table 4-11. omconfig chassis pwrmonitoring or omconfig mainsystem pwrmonitoring
name=value pair 1 name=value pair 2 Description
index=<n> NA Number of the probe or probe index
(must specify.)
config=probe warnthresh=
settodefault
Sets minimum and maximum warning
thresholds values to default.
warnthresh=<n> Sets a value for the warning threshold.
unit=watt | btuphr watt: Displays the unit in Watts.
btuphr: Displays the unit in BTU/hr.
config=resetreading type=energy |
peakpower
energy: Resets the system energy reading.
peakpower: Resets the system peak
power.
Table 4-10. omconfig chassis pwrmanagement or omconfig mainsystem
pwrmanagement
(continued)
name=value pair 1 name=value pair 2 Description