Command Line Interface Guide

124 omconfig: Managing Components Using the Instrumentation Service

In the following example, the asset tag for the main system chassis is being set

to buildsys:

omconfig chassis info index=0 tag=buildsys

omconfig mainsystem info index=0 tag=buildsys

Index 0 always defaults to the main system chassis. The following command

omits index=n, but accomplishes the same thing:

omconfig chassis info tag=buildsys

omconfig mainsystem info tag=buildsys

An acceptable command, when executed, results in the following message:

Chassis info set successfully.

For some chassis, you can assign a different name. You cannot rename the

main system chassis. In the following example, the command renames chassis

2 from storscsi1 to storscsia:

omconfig chassis info index=2 name=storscsia

omconfig mainsystem info index=2 name=storscsia

As with other commands, the CLI issues an error message if you do not have a

chassis 2 (the main chassis=0.) The CLI allows you to issue commands only

for the system configuration you have.

Table 4-7. omconfig chassis info or omconfig mainsystem info

name=value pair Description

index=<n> Number of the chassis whose asset tag or name you are

setting.

tag=<text> Asset tag in the form of alphanumeric text. Letters or

numbers should not exceed 10 characters.

name=<text> Name of the chassis.