Command Line Interface Guide

omconfig: Managing Components Using the Instrumentation Service 121

omconfig chassis fans index=0 warnthresh=default

omconfig mainsystem fans index=0 warnthresh=

default

You cannot default one value and set another. In other words, if you default

the minimum warning threshold value, you are also selecting the default

value for the maximum warning threshold value.

Specifying a Value for Minimum and Maximum Warning Thresholds

If you prefer to specify values for the fan probe warning thresholds, you must

specify the number of the probe you are configuring and the minimum and/or

maximum warning threshold values. In the following example, the probe that

is being configured is probe 0. The first command sets only the minimum

threshold; the second sets minimum and maximum thresholds:

omconfig chassis fans index=0 minwarnthresh=4580

omconfig mainsystem fans index=0 minwarnthresh=

4580

omconfig chassis fans index=0 minwarnthresh=4580

maxwarnthresh=9160

omconfig mainsystem fans index=0 minwarnthresh=

4580 maxwarnthresh=9160

When you issue the command and the system sets the values you specify, the

following message is displayed:

Fan probe warning threshold(s) set successfully.

NOTE: You cannot set the minimum and maximum warning thresholds for the fan

probe on PowerEdge x8xx and x9xx systems.

omconfig chassis frontpanel or omconfig mainsystem frontpanel

Use the omconfig chassis frontpanel or omconfig mainsystem frontpanel

command to:

• configure the power button and the Nonmasking Interrupt (NMI) button

• configure the LCD to display: