Command Line Interface Guide

116 omconfig: Managing Components Using the Instrumentation Service
SATA Settings
(continued)
attribute=SataPortD setting=Off | Auto
attribute=
SataPortDCapacity
setting=<string>
attribute=
SataPortDDriveType
setting=<string>
attribute=SataPortDModel setting=<string>
attribute=SataPortE setting=Off | Auto
attribute=
SataPortECapacity
setting=<string>
attribute=
SataPortEDriveType
setting=<string>
attribute=SataPortEModel setting=<string>
attribute=SataPortF setting=Off | Auto
attribute=
SataPortFCapacity
setting=<string>
attribute=
SataPortFDriveType
setting=<string>
attribute=SataPortFModel setting=<string>
attribute=SataPortG setting=Off | Auto
attribute=
SataPortGCapacity
setting=<string>
attribute=
SataPortGDriveType
setting=<string>
attribute=SataPortGModel setting=<string>
attribute=SataPortH setting=Off | Auto
attribute=
SataPortHCapacity
setting=<string>
attribute=
SataPortHDriveType
setting=<string>
Table 4-4. BIOS Setup Settings on PowerEdge yx2x Systems
(continued)
Group name=value pair 1
attribute=
name=value pair 2
setting=