Command Line Interface Guide

omconfig: Managing Components Using the Instrumentation Service 107
attribute=romb setting=raid | off |
scsi
force=true
raid: Instructs the BIOS to detect
RAID-on-motherboard as a RAID device.
off: Disables the device during
system boot.
scsi: Instructs the BIOS to detect this
device as a SCSI device.
force=true: Verification of setting
change.
attribute=romba setting=raid | scsi
force=true
raid: Instructs the BIOS to detect
RAID-on-motherboard channel A as a
RAID device.
scsi: Instructs the BIOS to detect this
device as a SCSI device.
force=true: Verification of
setting change.
attribute=rombb setting=raid | scsi
force=true
raid: Instructs the BIOS to detect
RAID-on-motherboard channel B as a
RAID device.
scsi: Instructs the BIOS to detect this
device as a SCSI device.
force=true: Verification of setting
change.
attribute=sata setting=off | ata | raid off: Disables the SATA controller.
ata: Sets the onboard SATA controller to
ATA mode.
raid: Sets the onboard SATA controller
to RAID mode.
attribute=sataport
(0...7) or (a...h)
setting=off | auto off: Disables the SATA port.
auto: Automatically enable the
SATA port.
Table 4-3. BIOS Setup Settings on systems prior to PowerEdge
yx2x systems
name=value pair 1
attribute=
name=value pair 2
setting=
Description