Command Line Interface Guide

omconfig: Managing Components Using the Instrumentation Service 105
attribute=nic3 setting=enabled |
enabledwithpxe |
disabled | enabledonly
| enablednonepxe |
enabledwithiscsi
enabled: Enables the third NIC during
system boot.
enabledwithpxe: Enables the third NIC
during system boot (with PXE on if the
system has PXE.)
disabled: Disables the third NIC during
system boot.
enabledonly: Enables the third NIC
during system boot (with PXE off if the
system has PXE.)
enablednonepxe: Enables the third NIC
during system boot (with PXE off if the
system has PXE.)
enabledwithiscsi: Enables the third NIC
during system boot (with iSCSI on if the
system has iSCSI.)
attribute=nic4 setting=enabled |
enabledwithpxe |
disabled | enabledonly
| enablednonepxe |
enabledwithiscsi
enabled: Enables the fourth NIC during
system boot.
enabledwithpxe: Enables the fourth
NIC during system boot (with PXE on if
the system has PXE.)
disabled: Disables the fourth NIC
during system boot.
enabledonly: Enables the fourth NIC
during system boot (with PXE off if the
system has PXE.)
enablednonepxe: Enables the fourth
NIC during system boot (with PXE off if
the system has PXE.)
enabledwithiscsi: Enables the fourth
NIC during system boot (with iSCSI on
if the system has iSCSI.)
Table 4-3. BIOS Setup Settings on systems prior to PowerEdge
yx2x systems
name=value pair 1
attribute=
name=value pair 2
setting=
Description