Users Guide

Setting Alert Actions 113
Temperature Probe
Wa rn in g
The temperature is approaching excessively high or
low limits.
Temperature Probe
Failure
The temperature is either too high or too low for
proper operation.
Chassis Intrusion
Detected
The system chassis has been opened.
Redundancy (PS or Fan)
Degraded
Redundancy for the fans and/or power supplies has
been reduced.
Redundancy (PS or Fan)
Lost
No redundancy remains for the system's fans and/or power
supplies.
Processor Warning A processor is running at less than peak performance or
speed.
Processor Failure A processor has failed.
Processor Absent A processor has been removed.
PS/VRM/D2D
Warni ng
The power supply, voltage regulator module, or DC to
DC converter is pending a failure condition.
PS/VRM/D2D
Failure
The power supply, voltage regulator module, or DC to
DC converter has failed.
Hardware log is full or
emptied
Either an empty or a full hardware log requires
administrator attention.
Automatic System
Recovery
The system is hung or is not responding and is taking an
action configured by Automatic System Recovery.
System Power Probe
Wa rn in g
The power consumption is approaching the failure
threshold.
System Power Probe
Failure
The power consumption has crossed the highest
acceptable limit and has resulted in a failure.
Removable Flash
Media Absent
The removable flash media is removed.
Removable Flash
Media Failure
The removable flash media is pending a failure condition.
Table 7-1. PEF Alert Events
(continued)
Event Description
book.book Page 113 Tuesday, March 6, 2012 6:13 PM