Users Guide

Working with Remote Access Controller 101
Additional Configuration for iDRAC
To configure the IPv4 and IPv6 properties using the Additional
Configuration tab:
1
Click the Modular Enclosure  System/Server Module  Main System
Chassis/Main System
 Remote Access object.
2 Click the Configuration tab.
3 Click Additional Configuration.
4 Configure the IPv4 and IPv6 properties as Enabled or Disabled .
5 Click Apply Changes.
For information about license management, see the Dell License Manager
User’s Guide available at support.dell.com.
Configuring Remote Access Device Users
To configure Remote Access Device users using the Remote Access page:
1
Click the Modular Enclosure  System/Server Module  Main System
Chassis/Main System
 Remote Access object.
2 Click the Users tab.
The
Remote Access Users window displays information about users that
can be configured as BMC/iDRAC users.
3 Click User ID to configure a new or existing BMC/iDRAC user.
The
Remote Access User Configuration window allows you to configure a
specific BMC/iDRAC user.
4 Specify the following general information:
– Select
Enable User to enable the user.
– Enter the name for the user in the
User Name field.
– Select the
Change Password check box.
– Enter a new password in the
New Password field.
– Re-enter the new password in the
Confirm New Password field.
book.book Page 101 Tuesday, March 6, 2012 6:13 PM