Users Guide

100 Working with Remote Access Controller
8 Click Apply Changes .
9 Click Back To Serial Port Configuration Window to go to back to the
Serial Port Configuration window.
Configuring the Remote Access Device to Use
a Serial Over LAN Connection
To configure the BMC/iDRAC for communication over a serial over LAN
(SOL) connection:
1
Click the Modular Enclosure  System/Server Module  Main System
Chassis/Main System
 Remote Access .
2 Click the Configuration tab.
3 Click Serial Over LAN .
The
Serial Over LAN Configuration window appears.
4 Configure the following details:
– Enable Serial Over LAN
–Baud Rate
– Minimum Privilege Required
5 Clic k Apply Changes.
6 Click Advanced Settings to further configure BMC.
7 In the Serial Over LAN Configuration Advanced Settings window,
you may configure the following information:
– Character Accumulate Interval
– Character Send Threshold
8 Click Apply Changes.
9 Click Go Back to Serial Over LAN Configuration to return to the Serial
Over LAN Configuration
window.
book.book Page 100 Tuesday, March 6, 2012 6:13 PM