User's Manual

Set Check Consistency Rate

Does my controller support this feature? See Supported Features.
The Set Check Consistency Rate task changes the amount of system resources dedicated to the check consistency task. See Check Consistency for more
information about the check consistency task.
The check consistency rate, configurable between 0% and 100%, represents the percentage of the system resources dedicated to running the check
consistency task. At 0%, the check consistency has the lowest priority for the controller, takes the most time to complete, and is the setting with the least
impact to system performance. A check consistency rate of 0% does not mean that the check consistency is stopped or paused.
At 100%, the check consistency is the highest priority for the controller. The check consistency time is minimized and is the setting with the most impact to
system performance.

To change the controller's check consistency rate:

1. Type a numerical value in the New Check Consistency Rate text box. The value must be within the 0 – 100 range.

2. Click Apply Changes. To exit and cancel your changes, click Go Back to Previous Page.

To locate this task in Storage Management:

1. Expand the Storage tree object to display the controller objects.

2. Select a controller object.

3. Select the Information/Configuration subtab.

4. Select Set Check Consistency Rate from the Available Tasks drop-down menu.

5. Click Execute.
You can also locate this task from the Change Controller Properties drop down menu. For more information, see Change Controller Properties.

Related Information:
l Check Consistency
l Cancel Check Consistency
Set Reconstruct Rate

Does my controller support this feature? See Supported Features.
The Set Reconstruct Rate task changes the amount of system resources dedicated to the reconstruct task.
The reconstruct task remakes the virtual disk after you have changed the RAID level or otherwise reconfigured the virtual disk. The reconstruct rate,
configurable between 0% and 100%, represents the percentage of the system resources dedicated to running the reconstruct task. At 0%, the reconstruct
has the lowest priority for the controller, takes the most time to complete, and is the setting with the least impact to system performance. A reconstruct rate of
0% does not mean that the reconstruct is stopped or paused.
At 100%, the reconstruct is the highest priority for the controller, the reconstruct time is minimized, and is the setting with the most impact to system
performance.

To change the controller's reconstruct rate:

1. Type a numerical value in the New Reconstruct Rate text box. The value must be within the 0 – 100 range.

2. Click Apply Changes. To exit and cancel your changes, click Go Back to Previous Page.

To locate this task in Storage Management: