User's Manual


3. Select the Information/Configuration subtab.

4. Select a report from the Select Report drop-down menu.

5. Click Execute.

Available Reports
l Patrol Read Report
l Check Consistency Report
l Slot Occupancy Report

Rescan Controller

Does my controller support this feature? See Supported Features.
On SCSI controllers, a rescan updates configuration changes (such as new or removed devices) for all components attached to the controller. For information
on when you may want to do a rescan, see Rescan to Update Storage Configuration Changes.

To rescan a controller:

1. Expand the tree view to display the controller object.

2. Select the Controller object.

3. Click the Configuration/Information subtab.

4. Select Rescan from the Controller Tasks drop-down menu.

5. Click Execute.
You can also locate this task from the Change Controller Properties drop down menu. For more information, see Change Controller Properties.

Create Virtual Disk

Does my controller support this feature? See Supported Features.
Use the Create Virtual Disk task to launch the Create Virtual Disk Express Wizard. See Create Virtual Disk Express Wizard (Step 1 of 2) for more
information.

Enable Alarm (Controller)

Does my controller support this feature? See Supported Features.
Use the Enable Alarm task to enable the controller's alarm. When enabled, the alarm sounds in the event of a device failure.

Disable Alarm (Controller)

Does my controller support this feature? See Supported Features.
Use the Disable Alarm task to disable the controller's alarm. When disabled, the alarm does not sound in the event of a device failure.

NOTE: Rescan Controller is not supported on non-RAID SCSI controllers. You must reboot the system before Storage Management can see configuration
changes on non-RAID SCSI controllers. Otherwise, configuration changes are not reflected in the Storage Management graphical user interface (GUI).