User's Manual

Supported Features on the Non-RAID Controllers
This section identifies the controller-supported features and whether or not an enclosure can be attached to the controller.
l Controller Tasks
l Battery Tasks
l Connector Tasks
l Physical Disk Tasks
l Virtual Disk Tasks
l Enclosure Support
For enclosure-supported tasks, see Enclosure and Backplane Features.

Controller Tasks
Table 1-53. Controller Tasks Supported on the Non-RAIDControllers

Battery Tasks
Table 1-54. Battery Tasks Supported on the Non-RAIDControllers

Connector Tasks
Table 1-55. Connector Tasks Supported on the Non-RAIDControllers

Enclosure Support

PERC S100

PERC S300
Can an enclosure be attached to this controller?
No
No

Controller Task Name

Non-RAID SCSI

Non-RAID SAS
Enable Alarm
No
No
Disable Alarm
No
No
Quiet Alarm
No
No
Test Alarm
No
No
Reset configuration
No
No
Set Rebuild Rate
No
No
Set Background Initialization Rate
No
No
Set Check Consistency Rate
No
No
Set Reconstruct Rate
No
No
Rescan Controller
No
No
Create Virtual Disk
No
No
Export Log File
No
No
Clear Foreign Configuration
No
No
Import Foreign Configuration
No
No
Import/Recover Foreign Configuration
No
No
Set Patrol Read Mode
No
No
Start Patrol Read
No
No
Stop Patrol Read
No
No

Battery Task Name

Non-RAID SCSI

Non-RAID SAS
Recondition Battery
No
No
Start Learn Cycle
No
No
Delay Learn Cycle
No
No