SNMP Reference Guide

714 Traps
Log type: <Log type> Specifies the type of hardware log, for example:
Log type: Embedded Server
Management (ESM)
Memory device bank
location:
<Bank name in chassis>
Specifies the name of the memory bank in the
system that generated the message, for
example:
Memory device bank location:
Bank_1
Memory device location:
<Device name in
chassis>
Specifies the location of the memory module
in the chassis, for example:
Memory device location: DIMM_A
Number of devices
required for full
redundancy: <Number>
Specifies the number of power supply or
cooling devices required to achieve full
redundancy, for example:
Number of devices required for
full redundancy: 4
Peak value (in Watts):
<Reading>
Specifies the peak value in Watts, for example:
Peak value (in Watts): 125
Possible memory module
event cause: <list of
causes>
Specifies a list of possible causes for the
memory module event, for example:
Possible memory module event
cause: Single bit warning
error rate exceeded
Single bit error logging
disabled
Power Supply type:
<type of power supply>
Specifies the type of power supply, for example:
Power Supply type: VRM
Pre-failure state was:
<State>
Specifies the status of the previous memory
message, for example:
Pre-failure state was: Failed
Table 27-1. Trap Description Reference
(continued)
Description Line Item Explanation
book.book Page 714 Monday, March 14, 2011 3:01 PM