SNMP Reference Guide

Traps 713
Current sensor value
(in Amps): <Reading>
Specifies the current sensor value in amps,
for example:
Current sensor value: 7.853
Date and time of
action:
<Date and time>
Specifies the date and time that an automatic
server recovery action was performed, for
example:
Date and time of action:
Fri May 30 23:55:44 2003.
Description:
<Description of event>
Specifies the description of the event that
occurred, for example:
Description: Chipset Err:
Critical Event sensor, front
panel NMI / diagnostic interrupt
was asserted.
Device location:
<Location in chassis>
Specifies the location of the device in the
specified chassis, for example:
Device location: Mem Card A
Discrete current state:
<State>
Specifies the state of the current sensor, for
example:
Discrete current state: Good
Discrete temperature
state: <State>
Specifies the state of the temperature sensor,
for example:
Discrete temperature state:
Good
Discrete voltage state:
<State>
Specifies the state of the voltage sensor, for
example:
Discrete voltage state: Good
Fan sensor value:
<Reading>
Specifies the fan speed in revolutions per
minute (RPMs) or On/Off, for example:
Fan sensor value (in RPM): 2600
Fan sensor value: Off
Table 27-1. Trap Description Reference
(continued)
Description Line Item Explanation
book.book Page 713 Monday, March 14, 2011 3:01 PM