SNMP Reference Guide

22 Introduction
Server Administrator Change Management MIB
The Server Administrator Change Management MIB (filename dellcm.mib)
provides management data that allows you to monitor the inventory of devices
and applications with SNMP management applications.
Table 1-6 describes each Server Administrator Change Management MIB
group and lists the MIB group number assigned to the MIB group. The Server
Administrator Change Management MIB groups are identified by the SNMP
OID 1.3.6.1.4.1.674.<MIB group number> where <MIB group number> is
the MIB group number assigned to the MIB group. See the relevant section
for more information about the MIB objects defined in a MIB group.
Table 1-5. Server Administrator Storage Management MIB Sections in This Guide
Section Topics MIB Group
Numbers
23 Storage Management Group — consists of definitions for the
following MIB groups:
• Storage Management Group
• Storage Management Information Group
•Global Data Group
•Physical Devices Group
• Logical Devices Group
• Storage Management Event Group
10893
27 Storage Management Alert Reference — lets you monitor the
health of storage resources such as controllers, connectors,
array disks, and virtual disks
NA
Table 1-6. Server Administrator Change Management MIB Sections in This Guide
Section Topics MIB Group
Number
24 Change Management Group - describes the inventory data
provided by the Change Management MIB that allows users
to monitor devices and software present on a particular
managed computer chassis
10899
book.book Page 22 Monday, March 14, 2011 3:01 PM