Read me

utilities is not supported. It is recommended that
you uninstall these utilities before installing Storage
Management. Storage Management replaces the storage management
features provided by these utilities. Examples of
3rd party Linux utilities include:
- LinFlash
- DellMgr
- DellMON
- LINLib
- MegaMgr
- MegaMON
Note: These utilities are only applicable to the following controllers:
PERC 4/SC, 4/DC, 4e/DC, 4/Di, 4/IM, 4e/Si, 4e/Di.
* See the "Installing Server Administrator" chapter in the Server
Administrator User's Guide.
Note: You cannot reinstall Storage Management on a system that
already has Storage Management installed. If you need to
reinstall Storage Management, you must first uninstall the
existing installation using the Server Administrator
uninstallation process.
Note: Installing Storage Management on a system that does not have a
supported controller or that has a controller that is not
attached to storage is not supported. If you install or run
Storage Management on an unsupported
configuration, unexpected and undesirable system behavior may
occur. It is recommended to use Server Administrator Storage
Management 3.5 on controllers that have PERC 7.2 firmware
or later only.
See the WARNINGS section of this readme for additional
information.
======================================================================
Criticality
======================================================================
2 - Recommended
Note: The Storage Management service does not support Novell(R)
NetWare(R) operating systems or fibre channel storage.
the Storage Management service does not provide Disk and
volume management.
*****************************************************************************
***
WARNINGS
*****************************************************************************
***
* As a general rule, use only one RAID utility to
configure and manage storage. Installing the Storage Management