Messages Reference Guide

System Event Log Messages for IPMI Systems 225
Processor Status Events
The processor status messages monitor the functionality of the processors in a
system. These messages provide processor health and warning information of
a system.
Table 4-4. Processor Status Events
Event Message Severity Cause
<Processor Entity> status
processor sensor IERR,
where <Processor Entity>
is the processor that
generated the event. For
example, PROC for a single
processor system and PROC
# for multiprocessor
system.
Critical IERR internal error generated by
the <
Processor Entity >.
This event is generated due to
processor internal error.
<Processor Entity> status
processor sensor Thermal
Trip.
Critical The processor generates this
event before it shuts down
because of excessive heat caused
by lack of cooling or heat
synchronization.
<Processor Entity>
status processor sensor
recovered from IERR.
Information This event is generated when a
processor recovers from the
internal error.
<Processor Entity> status
processor sensor disabled.
Warning This event is generated for all
processors that are disabled.
<Processor Entity> status
processor sensor
terminator not present.
Information This event is generated if the
terminator is missing on an
empty processor slot.
<Processor Entity>
presence was deasserted.
Critical This event is generated when the
system could not detect the
processor.
<Processor Entity>
presence was asserted.
Information This event is generated when the
earlier processor detection error
was corrected.