Command Line Interface Guide

96 omconfig: Managing Components
attribute=
cpuxdsupport
setting=enabled |
disabled
enabled: Enables Execute Disable (XD)
support on system.
disabled: Disables XD support on
system.
attribute=cpucore setting=1 | 2 | 4 | 6 |
8 | 10 | 12 |all
1: Enables one core per processor.
2: Enables two cores per processor.
4: Enables four cores per processor.
6: Enables six cores per processor.
8: Enables eight cores per processor.
10: Enables ten cores per processor.
12: Enables twelve cores per processor.
all: Enables the maximum cores per
processor.
attribute=dbs setting=enable |
disable
enable: Enables Demand Based
Switching (DBS) on the system.
disable: Disables DBS on the system.
attribute=diskette setting=off | auto |
writeprotect
off: Disables the diskette drive.
auto: Auto-enables the diskette drive.
writeprotect: Do not allow writes. Make
the diskette drive read-only.
Table 4-3. BIOS Setup Settings
(continued)
name=value pair 1
attribute=
name=value pair 2
setting=
Description