Command Line Interface Guide

84 omconfig: Managing Components
Conventions for Parameter Tables
When listing the parameters that a command can take, the parameters are
listed in alphabetical order instead of the order in which they appear in the
command line interface.
The symbol |, often called pipe, is the logical exclusive or operator. For
example, enable | disable means that you can enable or disable the
component or feature, but you cannot simultaneously enable and disable the
component or feature.
omconfig Command Summary
NOTE: Although this section lists all possible omconfig commands, the commands
available on your system depend on your system configuration. If you try to get help
or execute a command for a component not installed on your system, Server
Administrator issues a message that the component or feature is not found on
the system.
Table 4-2 is a high-level summary of the omconfig command. The columns
titled Command level 2 and Command level 3 list the major arguments that
can be used with omconfig. User privilege required refers to the type of privilege
you need to perform the command, where U=User, P=Power User, and A=
Administrator. Use is a very general statement about the actions that can be
performed using omconfig. More details about syntax and use of the
command appear later in this section.
Table 4-1. System Availability for the omconfig Command
Command Level 1 Command Level 2 Applicable to
omconfig servermodule Modular system
mainsystem Modular system
system Non-modular system
chassis Non-modular system