Command Line Interface Guide

omreport: Viewing System Status 81
If the system is configured to shutdown when a temperature probe detects
a warning or failure event, one of the following messages displays:
Thermal protect shutdown severity: warning
Thermal protect shutdown severity: failure
omreport system version/omreport servermodule version
Use the omreport system version or omreport servermodule version
command to list the version numbers of the BIOS, firmware, systems
management software, and operating system installed on your system.
Example Command Output
Ty p e :
omreport system version
or
omreport servermodule version
NOTE: If iDRAC is installed, Server Administrator displays the LCC version. If BMC
is installed, Server Administrator displays the USC version.
The output that appears in your CLI window depends on the version of the
BIOS, RAID controllers, and firmware installed on your system. The
following partial command results are unique and may not resemble the
results for the configuration of your system:
Version Report
---------------------
Main System Chassis
---------------------
Name : BIOS
Version : 0.2.16
Name : BMC
Version : 0.26
Name : Primary Backplane
Version : 1.01