Command Line Interface Guide

omreport: Viewing System Status 59
For each power monitoring profile in the system, values display for the
following fields:
• Power Consumption Status
•Probe Name
•Reading
• Warning Threshold
•Failure Threshold
• Amperage: Location and Reading
• Power Tracking Statistics
• Energy Consumption
• Measurement Start Time
• Measurement Finish Time
•Reading
• System Peak Power
• System Peak Amperage
NOTE: The omreport chassis pwrmonitoring or omreport mainsystem
pwrmonitoring command is applicable only to selected Dell xx0x and xx1x systems
that support PMBus.
NOTE: Power Management features are only available for PowerEdge systems
that have hot-swappable power supplies and not systems that have a fixed, non-
redundant power supply installed.
NOTE: To maintain consistency across the commands, the output format of this
command and the subsequent command levels has changed. So, you may have to
change the user scripts as applicable.
Table 3-4. omreport chassis pwrmonitoring/omreport mainsystem pwrmonitoring
name=value pair Description
config=stats Reports power statistics in Watts.