Command Line Interface Guide

58 omreport: Viewing System Status
Custom attributes are:
CPU Power and Performance Management, Memory Power and
Performance Management, and Fan Power and Performance Management.
NOTE: The omreport chassis pwrmanagement or omreport mainsystem
pwrmanagement command is applicable only to selected Dell xx1x systems that
support Power Management Bus (PMBus).
NOTE: Power Management features are only available for PowerEdge systems
that have hot-swappable power supplies and not systems that have a fixed, non-
redundant power supply installed.
omreport chassis pwrmonitoring/omreport mainsystem pwrmonitoring
Use the omreport chassis pwrmonitoring or omreport mainsystem
pwrmonitoring command to view the properties of your system’s power
consumption. The values display either in Watts or BTU/Hr based on the
configuration. Type:
omreport chassis pwrmonitoring
or
omreport mainsystem pwrmonitoring
Power Inventory
Attribute
Value
Attribute
Value
:
:
:
:
System Idle Power
153 W
System Maximum Potential Power
597 W
Power Budget
Attribute
Values
Attribute
Values
:
:
:
:
Enable Power Cap
Enabled
Power Cap
400 W (56%)