Command Line Interface Guide

54 omreport: Viewing System Status
Base I/O Address is the starting I/O address expressed in hexadecimal.
IRQ Level is a hardware interrupt on a system. The hardware interrupt
signals the system's CPU that an event has started or ended in a peripheral
component such as a modem or printer. When communicated over a
peripheral component interconnect card, the IRQ level is a standard way
to identify the type of device that is sending the interrupt request.
Connector Type refers to the type of plug or cable and plug that connects
two devices together, in this case, the type of connector that attaches an
external device to a system. There are many connector types, each designed
to connect a different device type to a system. Examples include DB-9 Male,
AT, Access Bus, PS/2, and so on.
Maximum Speed is the port speed. Port speed refers to the data transmission
rate of an input/output channel, measured in numbers of bits per second.
Serial ports usually have a maximum speed of 115 Kbps and USB version 1.x
ports have a maximum speed of 12 Kbps.
omreport chassis processors/omreport mainsystem processors
Use the omreport chassis processors or omreport mainsystem processors
command to view properties of your system’s processors.
Values display for the following fields: Index, Status, Connector Name,
Processor Brand, Processor Version, Current Speed, State, and Core Count.
Index is the processor number.
Status is the current status of the processor.
Connector Name is the name or number of the device that occupies the
processor slot in the system.
Processor Brand is the type of processor made by a manufacturer such as
Intel Itanium, Intel Pentium III, Intel Xeon, or AMD Opteron.
Processor Version is the model and stepping number of the processor.
Current Speed is the actual processor speed in MegaHertz at system boot
time.
State is whether the processor slot is enabled or disabled.
Core Count is the number of processors integrated into one chip.