Command Line Interface Guide

omconfig storage Commands 257
omconfig Cachecade Commands
The following sections provide the omconfig command syntax required to
execute cachecade tasks.
NOTE: The cachecade feature will be available from first half of calendar year
2011.
omconfig Blink Cachecade
Use the following omconfig command syntax to blink the physical disks
included in a cachecade.
Complete Syntax
omconfig storage cachecade action=blink
controller=id cachecade=id
where id is the controller ID and cachecade ID as reported by the omreport
command. To obtain these values, type omreport storage controller to display
the controller IDs and then type omreport storage cachecade controller=ID to
display the IDs for the cachecades of the controller.
Example Syntax
To blink the physical disk in cachecade 4 on controller 1, type:
omconfig storage cachecade action=blink
controller=1 cachecade=4
Table 8-14. omconfig Cachecade Commands
Required Command Levels (1, 2, 3) Optional name=value pairs
omconfig storage cachecade
action=blink controller=id cachecade=id
action=unblink controller=id cachecade=id
action=deletecachecade controller=id cachecade=id
[force=yes]
action=resize controller=id cachecade=id pdisk=
<PDISKID>
action=rename controller=id cachecade=id name=
<string>