Command Line Interface Guide

242 omconfig storage Commands
omconfig Switch to DKM Controller
Use the following omconfig storage command syntax to change the
encryption key from LKM to DKM mode on the controller.
NOTE: The DKM feature will be available later.
Complete Syntax
omconfig storage controller action=switchtodkm
controller=id keyid=<keyid string> lkmpassphrase=
<lkm passphrase string>
where id is the controller ID as reported by the omreport storage controller
command.
Example Syntax
To change the encryption key for the controller, type:
omconfig storage controller action=switchtodkm
controller=1 keyid=Dell_123 lkmpassphrase=Dell_123
omconfig Enable DKM Controller
Use the following omconfig storage command syntax to enable the DKM
mode and create the encryption key for the controller.
NOTE: The DKM feature will be available later.
Complete Syntax
omconfig storage controller action=enabledkm
controller=id
where id is the controller ID as reported by the omreport storage controller
command.
Example Syntax
To change the encryption key for the controller, type:
omconfig storage controller action=enablekdm
controller=1