Command Line Interface Guide

236 omconfig storage Commands
Example Syntax
To unlock the encrypted DKM configuration drives on controller 1, type:
omconfig storage controller action=
unlockdkmforeignconfig controller=1
omconfig Import Foreign Configuration
Use the following omconfig command syntax to import all virtual disks that
reside on physical disks newly attached to the controller.
Complete Syntax
omconfig storage controller action=
importforeignconfig controller=id
where id is the controller ID as reported by the omreport storage controller
command.
NOTE: This command is supported only in firmware version 5.0.x.
Example Syntax
To import foreign configurations on controller 1, type:
omconfig storage controller action=
importforeignconfig controller=1
omconfig Import/Recover Foreign Configuration
Use the following omconfig command syntax to import and recover all virtual
disks that reside on physical disks newly attached to the controller.
Complete Syntax
omconfig storage controller action=
importrecoverforeignconfig controller=id
where id is the controller ID as reported by the omreport storage controller
command.
NOTE: This command is supported only in firmware version 5.1.1.