Command Line Interface Guide

omconfig storage Commands 219
action=importforeignconfig controller=id
action=importrecoverforeignconfig controller=id
action=clearforeignconfig controller=id
action=setpdiskpwrmanagement controller=id
spindownunconfigureddrives=<enabled/disabled>
spindownhotspares=<enabled/disabled>
spindowntimeinterval=<30 to 1440><minutes>
action=setpatrolreadmode controller=id
mode=<manual | auto | disable>
action=startpatrolread controller=id
action=stoppatrolread controller=id
action=createcachecade controller=id pdisk=<PDISKID>
[name=<string>]
action=enablelkm controller=id keyid=<keyid> passphrase=
<passphrase string> [escrow=yes] [filepath=<Absolute path to
the escrow file>]
NOTE: If you set escrow=yes, you should specify the escrow file
path.
action=switchtolkm controller=id keyid=<keyid> passphrase=
<passphrase string> [escrow=yes] [filepath=<Absolute path to
the escrow file>]
NOTE: If you set escrow=yes, you should specify the escrow file
path.
action=rekeylkm controller=id
action=switchtodkm controller=id keyid=<keyid>
lkmpassphrase=<LKM passphrase string>
NOTE: The DKM feature will be available later.
action=enabledkm controller=id
action=rekeydkm controller=id
action=unlockdkmforeignconfig controller=id
Table 8-4. omconfig Controller Commands
(continued)
Required Command
Levels (1, 2, 3)
Optional name=value pairs