Command Line Interface Guide

Introduction 19
NOTE: omupdate commands are no longer supported in Server Administrator and
are replaced by Dell Update Package or Server Update Utility commands. To update
the different components, download the Dell Update Package and run <package
name> /s [/f]. For more information on corresponding CLI syntax, see the Dell Update
Packages for Operating Systems User’s Guide or the Dell OpenManage Server Update
Utility Users Guide at support.dell.com/manuals.
Additional useful topics about the CLI include:
"Working With CLI Command Results" on page 261
CLI Error Checking and Error Messages
When you type CLI commands, the CLI checks these commands for correct
syntax. If you type a command and the command is executed successfully,
a message displays, stating that your command has been successful.
Success Messages
When you type a successful omconfig command, data for that
component displays.
The following omconfig command examples displays valid CLI commands
and their success messages:
Command:
omconfig chassis temps index=0 warnthresh=default
Table 1-1. CLI Commands and Sections in This Guide
Primary CLI
Command
Section Title Related Sections
omconfig "omconfig: Managing Components
Using the Instrumentation Service"
on page 83
"omconfig system or
servermodule assetinfo: Editing
Cost of Ownership Values" on
page 155
omhelp "Using the omhelp Command" on
page 25
omreport "omreport: Viewing System Status
Using the Instrumentation Service"
on page 29